/* atheme.conf.userserv-example, autogenerated from atheme.conf.example */
/* This is an example configuration for Services.
 *
 * All statements end in semi-colons (';').
 * Shell style, C style, and C++ style comments may be used.
 *
 * Items marked with "(*)" are reconfigurable at runtime via REHASH.
 */

/******************************************************************************
 * MODULES SECTION.                                                           *
 ******************************************************************************/

/*
 * These are the modules included with the core distribution of Services.
 *
 * You may be interested in the atheme community modules distribution as 
 * well, which adds additional features that may or may not be compatible
 * with the project paradigms intended for maintainance of the core of
 * atheme-services.
 *
 * Visit the atheme-services website for more information and to download them.
 *
 * Modules marked [experimental] will taint your atheme-services instance. Do
 * not file any bug reports with us about using Services with those modules;
 * they will be ignored.
 */

/* Dynamic security modules.
 *
 * WARNING: If you select one of these modules, the default security policy included
 * with Atheme may break.  These modules are intended for people who know what they
 * are doing and understand the implications of what they do.  Security modules which
 * are likely to break the default policy are prefixed with [!], if you are new to
 * Atheme, you should avoid enabling them.
 *
 * If you find your security policy is broken, you may debug it while allowing normal
 * operation of your IRC network by putting Atheme into "permissive mode".  To do this,
 * enable general::permissive_mode.
 *
 * [!] Infer "command:" namespace permissions   modules/security/cmdperm
 */
#loadmodule "modules/security/cmdperm";

/* Protocol module.
 *
 * Please select a protocol module. Different servers use different protocols.
 * Below is a listing of ircd's known to work with the various protocol modules
 * available.
 *
 * Asuka 1.2.1 or later                         modules/protocol/asuka
 * Bahamut 1.8.x                                modules/protocol/bahamut
 * Charybdis IRCd                               modules/protocol/charybdis
 * DreamForge 4.6.7 or later                    modules/protocol/dreamforge
 * InspIRCd 2.0                                 modules/protocol/inspircd
 * ircd-ratbox 2.0 and later                    modules/protocol/ratbox
 * IRCNet ircd (ircd 2.11)                      modules/protocol/ircnet
 * ircd-seven                                   modules/protocol/ircd-seven
 * Nefarious IRCu 0.4.0 or later                modules/protocol/nefarious
 * ngIRCd 19 or later [experimental]            modules/protocol/ngircd
 * UnrealIRCd 3.2.*                             modules/protocol/unreal
 * UnrealIRCd 4 or later                        modules/protocol/unreal4
 *
 * If your IRCd vendor has supplied a module file, build it and load it here
 * instead of one above.
 */
#loadmodule "modules/protocol/charybdis";

/* Protocol mixins.
 *
 * These should be used if you do not have/want certain features on your
 * network that your ircd normally has. If you do not know what this means,
 * you do not need any of them.
 *
 * Disable halfops                              modules/protocol/mixin_nohalfops
 * Disable holdnick (use enforcer clients)      modules/protocol/mixin_noholdnick
 * Disable "protect" mode on channels           modules/protocol/mixin_noprotect
 * Disable "owner" mode on channels             modules/protocol/mixin_noowner
 */
#loadmodule "modules/protocol/mixin_nohalfops";
#loadmodule "modules/protocol/mixin_noholdnick";
#loadmodule "modules/protocol/mixin_noprotect";
#loadmodule "modules/protocol/mixin_noowner";

/* Database backend module.
 * 
 * Please select a database backend module. Different backends allow for
 * different ways in which the services data can be manipulated. YOU MAY
 * ONLY HAVE ONE OF THESE BACKENDS LOADED.
 * 
 * The following backends are available:
 * 
 * Atheme 0.1 flatfile database format          modules/backend/flatfile
 * Open Services Exchange database format       modules/backend/opensex
 * 
 * Most networks will want opensex.
 */
loadmodule "modules/backend/opensex";

/* Crypto module.
 *
 * If you would like encryption for your services passwords, please
 * select a module here. Note that upon starting with a crypto module
 * YOUR PASSWORDS ARE IMMEDIATELY AND IRREVERSIBLY CONVERTED. Make at
 * least TWO backups of your database before experimenting with this.
 * If you have several thousand accounts, this conversion may take
 * appreciable time.
 *
 * The following crypto modules are available:
 *
 * Argon2d (Password Hashing Competition, v1.3) modules/crypto/argon2d
 * PBKDF2 cryptography (new, recommended)       modules/crypto/pbkdf2v2
 * PBKDF2 cryptography (old, compatibility)     modules/crypto/pbkdf2
 * POSIX-style crypt(3)                         modules/crypto/posix
 * IRCServices (also Anope etc) compatibility   modules/crypto/ircservices
 * Raw MD5 (Anope compatibility)                modules/crypto/rawmd5
 * Raw SHA1 (Anope compatibility)               modules/crypto/rawsha1
 *
 * The ircservices, rawmd5 and rawsha1 modules are only recommended for use with
 * a database converted from other services with password encryption.
 *
 * To transition between crypto schemes, load the preferred scheme first
 * and as users login, they will be migrated to the new preferred scheme. Like:
 *
 * loadmodule "modules/crypto/argon2d";
 * loadmodule "modules/crypto/pbkdf2v2";
 * loadmodule "modules/crypto/pbkdf2";
 * loadmodule "modules/crypto/posix";
 * loadmodule "modules/crypto/ircservices";
 *
 * The rawsha1 and pbkdf2/pbkdf2v2 modules require OpenSSL.
 * The Argon2d module has no dependencies and is recommended.
 */
#loadmodule "modules/crypto/argon2d";
loadmodule "modules/crypto/posix";

/* Authentication module.
 *
 * These allow using passwords from an external system. The password given
 * when registering a new account is also checked against the external
 * system.
 *
 * The following authentication modules are available:
 *
 * LDAP                                         modules/auth/ldap
 *
 * The LDAP module requires OpenLDAP client libraries. It uses them in a
 * synchronous manner, which means that an unresponsive LDAP server can
 * freeze services.
 */
#loadmodule "modules/auth/ldap";

/* NickServ modules.
 *
 * Here you can disable or enable certain features of NickServ, by
 * defining which modules are loaded. You can even disable NickServ
 * entirely. Please note however, that an authentication service
 * (either NickServ, or UserServ) is required for proper functionality.
 *
 * The CrackLib password validation module requires CrackLib to be
 * installed on your system in order to use.
 *
 * Core components                              modules/nickserv/main
 * Nickname access lists                        modules/nickserv/access
 * Bad email address blocking                   modules/nickserv/badmail
 * CertFP fingerprint managment                 modules/nickserv/cert
 * CrackLib password validation                 modules/nickserv/cracklib
 * DROP command                                 modules/nickserv/drop
 * Nickname enforcement                         modules/nickserv/enforce
 * GHOST command                                modules/nickserv/ghost
 * GROUP and UNGROUP commands                   modules/nickserv/group
 * HELP command                                 modules/nickserv/help
 * Nickname expiry override (HOLD command)      modules/nickserv/hold
 * IDENTIFY command                             modules/nickserv/identify
 * INFO command                                 modules/nickserv/info
 * Last quit message in INFO                    modules/nickserv/info_lastquit
 * LIST command                                 modules/nickserv/list
 * LISTMAIL command                             modules/nickserv/listmail
 * LISTOWNMAIL command                          modules/nickserv/listownmail
 * LOGIN command (for no_nick_ownership)        modules/nickserv/login
 * LOGOUT command                               modules/nickserv/logout
 * MARK command                                 modules/nickserv/mark
 * FREEZE command                               modules/nickserv/freeze
 * LISTCHANS command                            modules/nickserv/listchans
 * LISTGROUPS command                           modules/nickserv/listgroups
 * REGISTER command                             modules/nickserv/register
 * Bypass registration limits (REGNOLIMIT)      modules/nickserv/regnolimit
 * Password reset (RESETPASS command)           modules/nickserv/resetpass
 * RESTRICT command                             modules/nickserv/restrict
 * Password return (RETURN command)             modules/nickserv/return
 * Password retrieval (SENDPASS command)        modules/nickserv/sendpass
 * Password retrieval allowed to normal users   modules/nickserv/sendpass_user
 * SET command core                             modules/nickserv/set_core
 * Change primary nickname (SET ACCOUNTNAME)    modules/nickserv/set_accountname
 * SET EMAIL command                            modules/nickserv/set_email
 * SET EMAILMEMOS command                       modules/nickserv/set_emailmemos
 * SET ENFORCETIME command                      modules/nickserv/set_enforcetime
 * SET HIDEMAIL command                         modules/nickserv/set_hidemail
 * SET LANGUAGE command                         modules/nickserv/set_language
 * SET NEVERGROUP command                       modules/nickserv/set_nevergroup
 * SET NEVEROP command                          modules/nickserv/set_neverop
 * SET NOGREET command                          modules/nickserv/set_nogreet
 * SET NOMEMO command                           modules/nickserv/set_nomemo
 * SET NOOP command                             modules/nickserv/set_noop
 * SET NOPASSWORD command                       modules/nickserv/set_nopassword
 * SET PASSWORD command                         modules/nickserv/set_password
 * PRIVMSG instead of NOTICE (SET PRIVMSG cmd)  modules/nickserv/set_privmsg
 * Account info hiding (SET PRIVATE command)    modules/nickserv/set_private
 * SET PROPERTY command                         modules/nickserv/set_property
 * SET PUBKEY command                           modules/nickserv/set_pubkey
 * SET QUIETCHG command                         modules/nickserv/set_quietchg
 * Password retrieval uses code (SETPASS cmd)   modules/nickserv/setpass
 * STATUS command                               modules/nickserv/status
 * Nickname metadata viewer (TAXONOMY command)  modules/nickserv/taxonomy
 * VACATION command                             modules/nickserv/vacation
 * VERIFY command                               modules/nickserv/verify
 * VHOST command                                modules/nickserv/vhost
 */
loadmodule "modules/nickserv/main";
#loadmodule "modules/nickserv/access";
loadmodule "modules/nickserv/badmail";
#loadmodule "modules/nickserv/cert";
#loadmodule "modules/nickserv/cracklib";
loadmodule "modules/nickserv/drop";
#loadmodule "modules/nickserv/enforce";
#loadmodule "modules/nickserv/ghost";
loadmodule "modules/nickserv/group";
loadmodule "modules/nickserv/help";
loadmodule "modules/nickserv/hold";
#loadmodule "modules/nickserv/identify";
loadmodule "modules/nickserv/info";
#loadmodule "modules/nickserv/info_lastquit";
loadmodule "modules/nickserv/list";
loadmodule "modules/nickserv/listmail";
#loadmodule "modules/nickserv/listownmail";
loadmodule "modules/nickserv/login";
loadmodule "modules/nickserv/logout";
loadmodule "modules/nickserv/mark";
loadmodule "modules/nickserv/freeze";
loadmodule "modules/nickserv/listchans";
loadmodule "modules/nickserv/listgroups";
loadmodule "modules/nickserv/register";
loadmodule "modules/nickserv/regnolimit";
loadmodule "modules/nickserv/resetpass";
loadmodule "modules/nickserv/restrict";
loadmodule "modules/nickserv/return";
loadmodule "modules/nickserv/setpass";
#loadmodule "modules/nickserv/sendpass";
loadmodule "modules/nickserv/sendpass_user";
loadmodule "modules/nickserv/set_core";
loadmodule "modules/nickserv/set_accountname";
loadmodule "modules/nickserv/set_email";
loadmodule "modules/nickserv/set_emailmemos";
#loadmodule "modules/nickserv/set_enforcetime";
loadmodule "modules/nickserv/set_hidemail";
loadmodule "modules/nickserv/set_language";
loadmodule "modules/nickserv/set_nevergroup";
loadmodule "modules/nickserv/set_neverop";
loadmodule "modules/nickserv/set_nogreet";
loadmodule "modules/nickserv/set_nomemo";
loadmodule "modules/nickserv/set_noop";
loadmodule "modules/nickserv/set_password";
#loadmodule "modules/nickserv/set_privmsg";
#loadmodule "modules/nickserv/set_private";
loadmodule "modules/nickserv/set_property";
loadmodule "modules/nickserv/set_pubkey";
loadmodule "modules/nickserv/set_quietchg";
loadmodule "modules/nickserv/status";
loadmodule "modules/nickserv/taxonomy";
loadmodule "modules/nickserv/vacation";
loadmodule "modules/nickserv/verify";
loadmodule "modules/nickserv/vhost";

/* ChanServ modules.
 * 
 * Here you can disable or enable certain features of ChanServ, by
 * defining which modules are loaded. You can even disable ChanServ
 * entirely. Please note that ChanServ requires an authentication
 * service, either NickServ or UserServ will do.
 *
 * Core components                              modules/chanserv/main
 * ACCESS command (simplified ACL editing)      modules/chanserv/access
 * AKICK command                                modules/chanserv/akick
 * BAN/UNBAN commands                           modules/chanserv/ban
 * UNBAN self only (load ban or this not both)  modules/chanserv/unban_self
 * CLOSE command                                modules/chanserv/close
 * CLONE command                                modules/chanserv/clone
 * CLEAR command                                modules/chanserv/clear
 * CLEAR AKICKS command                         modules/chanserv/clear_akicks
 * CLEAR BANS command                           modules/chanserv/clear_bans
 * CLEAR FLAGS command                          modules/chanserv/clear_flags
 * CLEAR USERS command                          modules/chanserv/clear_users
 * COUNT command                                modules/chanserv/count
 * DROP command                                 modules/chanserv/drop
 * Forced flags changes                         modules/chanserv/fflags
 * FLAGS command                                modules/chanserv/flags
 * Forced foundership transfers                 modules/chanserv/ftransfer
 * GETKEY command                               modules/chanserv/getkey
 * HALFOP/DEHALFOP commands                     modules/chanserv/halfop
 * HELP command                                 modules/chanserv/help
 * Channel expiry override (HOLD command)       modules/chanserv/hold
 * INFO command                                 modules/chanserv/info
 * INVITE command                               modules/chanserv/invite
 * KICK/KICKBAN commands                        modules/chanserv/kick
 * LIST command                                 modules/chanserv/list
 * MARK command                                 modules/chanserv/mark
 * Moderated channel registrations              modules/chanserv/moderate
 * OP/DEOP commands                             modules/chanserv/op
 * OWNER/DEOWNER commands                       modules/chanserv/owner
 * PROTECT/DEPROTECT commands                   modules/chanserv/protect
 * QUIET command (+q support)                   modules/chanserv/quiet
 * Channel takeover recovery (RECOVER command)  modules/chanserv/recover
 * REGISTER command                             modules/chanserv/register
 * SET command core                             modules/chanserv/set_core
 * SET EMAIL command                            modules/chanserv/set_email
 * SET ENTRYMSG command                         modules/chanserv/set_entrymsg
 * SET FANTASY command                          modules/chanserv/set_fantasy
 * SET GAMESERV command                         modules/chanserv/set_gameserv
 * SET GUARD command                            modules/chanserv/set_guard
 * SET KEEPTOPIC command                        modules/chanserv/set_keeptopic
 * SET LIMITFLAGS command                       modules/chanserv/set_limitflags
 * SET MLOCK command                            modules/chanserv/set_mlock
 * SET PREFIX command                           modules/chanserv/set_prefix
 * Channel info hiding (SET PRIVATE command)    modules/chanserv/set_private
 * SET PROPERTY command                         modules/chanserv/set_property
 * SET PUBACL command                           modules/chanserv/set_pubacl
 * SET RESTRICTED command                       modules/chanserv/set_restricted
 * SET SECURE command                           modules/chanserv/set_secure
 * SET TOPICLOCK command                        modules/chanserv/set_topiclock
 * SET URL command                              modules/chanserv/set_url
 * SET VERBOSE command                          modules/chanserv/set_verbose
 * STATUS command                               modules/chanserv/status
 * SYNC command (and automatic ACL syncing)     modules/chanserv/sync
 * Named Successor ACL flag                     modules/chanserv/successor_acl
 * Channel metadata viewer (TAXONOMY command)   modules/chanserv/taxonomy
 * TEMPLATE command                             modules/chanserv/template
 * TOPIC/TOPICAPPEND commands                   modules/chanserv/topic
 * VOICE/DEVOICE commands                       modules/chanserv/voice
 * WHY command                                  modules/chanserv/why
 * VOP/HOP/AOP/SOP commands                     modules/chanserv/xop
 *  This module provides emulation of the ircservices XOP scheme ONLY.
 *  Do not report discrepencies when using native commands to edit channel
 *  ACLs. This is intentional.
 * Flood protection                             modules/chanserv/antiflood
 *  This module should be loaded after at least chanserv/quiet if you want
 *  the autoquiet feature to work.
 */
loadmodule "modules/chanserv/main";
loadmodule "modules/chanserv/access";
loadmodule "modules/chanserv/akick";
loadmodule "modules/chanserv/ban";
#loadmodule "modules/chanserv/unban_self";
loadmodule "modules/chanserv/clone";
loadmodule "modules/chanserv/close";
loadmodule "modules/chanserv/clear";
loadmodule "modules/chanserv/clear_akicks";
loadmodule "modules/chanserv/clear_bans";
loadmodule "modules/chanserv/clear_flags";
loadmodule "modules/chanserv/clear_users";
loadmodule "modules/chanserv/count";
loadmodule "modules/chanserv/drop";
#loadmodule "modules/chanserv/fflags";
loadmodule "modules/chanserv/flags";
loadmodule "modules/chanserv/ftransfer";
loadmodule "modules/chanserv/getkey";
#loadmodule "modules/chanserv/halfop";
loadmodule "modules/chanserv/help";
loadmodule "modules/chanserv/hold";
loadmodule "modules/chanserv/info";
loadmodule "modules/chanserv/invite";
loadmodule "modules/chanserv/kick";
loadmodule "modules/chanserv/list";
loadmodule "modules/chanserv/mark";
#loadmodule "modules/chanserv/moderate";
loadmodule "modules/chanserv/op";
#loadmodule "modules/chanserv/owner";
#loadmodule "modules/chanserv/protect";
#loadmodule "modules/chanserv/quiet";
loadmodule "modules/chanserv/recover";
loadmodule "modules/chanserv/register";
loadmodule "modules/chanserv/set_core";
loadmodule "modules/chanserv/set_email";
loadmodule "modules/chanserv/set_entrymsg";
loadmodule "modules/chanserv/set_fantasy";
#loadmodule "modules/chanserv/set_gameserv";
loadmodule "modules/chanserv/set_guard";
loadmodule "modules/chanserv/set_keeptopic";
#loadmodule "modules/chanserv/set_limitflags";
loadmodule "modules/chanserv/set_mlock";
loadmodule "modules/chanserv/set_prefix";
#loadmodule "modules/chanserv/set_private";
loadmodule "modules/chanserv/set_property";
#loadmodule "modules/chanserv/set_pubacl";
loadmodule "modules/chanserv/set_restricted";
loadmodule "modules/chanserv/set_secure";
loadmodule "modules/chanserv/set_topiclock";
loadmodule "modules/chanserv/set_url";
loadmodule "modules/chanserv/set_verbose";
loadmodule "modules/chanserv/status";
loadmodule "modules/chanserv/sync";
#loadmodule "modules/chanserv/successor_acl";
loadmodule "modules/chanserv/taxonomy";
loadmodule "modules/chanserv/template";
loadmodule "modules/chanserv/topic";
loadmodule "modules/chanserv/voice";
loadmodule "modules/chanserv/why";
#loadmodule "modules/chanserv/xop";
loadmodule "modules/chanserv/antiflood";

/* CHANFIX module.
 *
 * Here you can disable or enable certain features of CHANFIX, by
 * defining which modules are loaded.
 *
 * Core components                              modules/chanfix/main
 */
#loadmodule "modules/chanfix/main";

/* OperServ modules.
 *
 * Here you can disable or enable certain features of OperServ, by
 * defining which modules are loaded.
 *
 * Core components                              modules/operserv/main
 * AKILL system                                 modules/operserv/akill
 * CLEARCHAN command                            modules/operserv/clearchan
 * CLONES system                                modules/operserv/clones
 * COMPARE command                              modules/operserv/compare
 * GREPLOG command                              modules/operserv/greplog
 * HELP command                                 modules/operserv/help
 * IGNORE system                                modules/operserv/ignore
 * IDENTIFY command                             modules/operserv/identify
 * INFO command                                 modules/operserv/info
 * INJECT command                               modules/operserv/inject
 * JUPE command                                 modules/operserv/jupe
 * MODE command                                 modules/operserv/mode
 * MODINSPECT command                           modules/operserv/modinspect
 * MODLIST command                              modules/operserv/modlist
 * MODLOAD command                              modules/operserv/modload
 * MODRELOAD command                            modules/operserv/modreload
 * MODUNLOAD command                            modules/operserv/modunload
 * NOOP system                                  modules/operserv/noop
 * Override access (OVERRIDE command)           modules/operserv/override
 * Regex mass akill (RAKILL command)            modules/operserv/rakill
 * RAW command                                  modules/operserv/raw
 * READONLY command                             modules/operserv/readonly
 * REHASH command                               modules/operserv/rehash
 * RESTART command                              modules/operserv/restart
 * Display regex matching (RMATCH command)      modules/operserv/rmatch
 * Most common realnames (RNC command)          modules/operserv/rnc
 * RWATCH system                                modules/operserv/rwatch
 * Temporarily modify config options (SET command)  modules/operserv/set
 * SGLINE system                                modules/operserv/sgline
 * SHUTDOWN command                             modules/operserv/shutdown
 * Non-config oper privileges (SOPER command)   modules/operserv/soper
 * Oper privilege display (SPECS command)       modules/operserv/specs
 * SQLINE system                                modules/operserv/sqline
 * UPDATE command                               modules/operserv/update
 * UPTIME command                               modules/operserv/uptime
 */
loadmodule "modules/operserv/main";
loadmodule "modules/operserv/akill";
#loadmodule "modules/operserv/clearchan";
#loadmodule "modules/operserv/clones";
loadmodule "modules/operserv/compare";
#loadmodule "modules/operserv/greplog";
loadmodule "modules/operserv/help";
loadmodule "modules/operserv/identify";
loadmodule "modules/operserv/ignore";
loadmodule "modules/operserv/info";
loadmodule "modules/operserv/jupe";
loadmodule "modules/operserv/mode";
loadmodule "modules/operserv/modinspect";
loadmodule "modules/operserv/modlist";
loadmodule "modules/operserv/modload";
loadmodule "modules/operserv/modunload";
loadmodule "modules/operserv/modreload";
loadmodule "modules/operserv/noop";
#loadmodule "modules/operserv/override";
#loadmodule "modules/operserv/rakill";
loadmodule "modules/operserv/readonly";
loadmodule "modules/operserv/rehash";
loadmodule "modules/operserv/restart";
loadmodule "modules/operserv/rmatch";
loadmodule "modules/operserv/rnc";
loadmodule "modules/operserv/rwatch";
loadmodule "modules/operserv/set";
loadmodule "modules/operserv/sgline";
loadmodule "modules/operserv/shutdown";
#loadmodule "modules/operserv/soper";
loadmodule "modules/operserv/specs";
loadmodule "modules/operserv/sqline";
loadmodule "modules/operserv/update";
loadmodule "modules/operserv/uptime";

/* MemoServ modules.
 *
 * Here you can disable or enable certain features of MemoServ, by
 * defining which modules are loaded. You can even disable MemoServ
 * entirely.
 *
 * Core components                              modules/memoserv/main
 * HELP command                                 modules/memoserv/help
 * SEND command                                 modules/memoserv/send
 * Channel memos (SENDOPS command)              modules/memoserv/sendops
 * Group memos (SENDGROUP command)              modules/memoserv/sendgroup
 * LIST command                                 modules/memoserv/list
 * READ command                                 modules/memoserv/read
 * FORWARD command                              modules/memoserv/forward
 * DELETE command                               modules/memoserv/delete
 * IGNORE command                               modules/memoserv/ignore
 */
loadmodule "modules/memoserv/main";
loadmodule "modules/memoserv/help";
loadmodule "modules/memoserv/send";
loadmodule "modules/memoserv/sendops";
loadmodule "modules/memoserv/sendgroup";
loadmodule "modules/memoserv/list";
loadmodule "modules/memoserv/read";
loadmodule "modules/memoserv/forward";
loadmodule "modules/memoserv/delete";
loadmodule "modules/memoserv/ignore";

/* Global module.
 *
 * Like the other services, the Global noticer is a module. You can
 * disable or enable it to your liking below. Please note that the
 * Global noticer is dependent on OperServ for full functionality.
 */
loadmodule "modules/global/main";

/* InfoServ module.
 *
 * Like the other services, InfoServ is a module. You can disable or
 * enable it to your liking below.
 */
loadmodule "modules/infoserv/main";

/* SASL agent module.
 *
 * Allows clients to authenticate to services via SASL with an appropriate
 * ircd. You need the core components and at least one mechanism.
 *
 * Core components                              modules/saslserv/main
 * PLAIN mechanism                              modules/saslserv/plain
 * ECDSA-NIST256p-CHALLENGE                     modules/saslserv/ecdsa-nist256p-challenge
 * AUTHCOOKIE mechanism (for IRIS)              modules/saslserv/authcookie
 * EXTERNAL mechanism (IRCv3.1+)                modules/saslserv/external
 *
 * ECDSA-NIST256p-CHALLENGE support requires that Atheme be compiled against OpenSSL.
 */
loadmodule "modules/saslserv/main";
loadmodule "modules/saslserv/plain";
loadmodule "modules/saslserv/authcookie";
#loadmodule "modules/saslserv/external";
#loadmodule "modules/saslserv/ecdsa-nist256p-challenge"; /* requires SSL */

/* GameServ modules.
 *
 * Here you can disable or enable certain features of GameServ, by
 * defining which modules are loaded. You can even disable GameServ
 * entirely.
 *
 * Core components                              modules/gameserv/main
 * DICE/WOD commands                            modules/gameserv/dice
 * EIGHTBALL command                            modules/gameserv/eightball
 * Game-specific dice calculators               modules/gameserv/gamecalc
 * HELP commands                                modules/gameserv/help
 * LOTTERY command                              modules/gameserv/lottery
 * NAMEGEN command                              modules/gameserv/namegen
 * RPS command                                  modules/gameserv/rps
 */
#loadmodule "modules/gameserv/main";
#loadmodule "modules/gameserv/dice";
#loadmodule "modules/gameserv/eightball";
#loadmodule "modules/gameserv/gamecalc";
#loadmodule "modules/gameserv/help";
#loadmodule "modules/gameserv/lottery";
#loadmodule "modules/gameserv/namegen";
#loadmodule "modules/gameserv/rps";

/* RPGServ modules.
 *
 * Here you can disable or enable certain features of RPGServ, by
 * defining which modules are loaded. You can even disable RPGServ
 * entirely.
 *
 * Core components                              modules/rpgserv/main
 * ENABLE/DISABLE commands                      modules/rpgserv/enable
 * HELP command                                 modules/rpgserv/help
 * INFO command                                 modules/rpgserv/info
 * LIST command                                 modules/rpgserv/list
 * SEARCH command                               modules/rpgserv/search
 * SET commands                                 modules/rpgserv/set
 */
#loadmodule "modules/rpgserv/main";
#loadmodule "modules/rpgserv/enable";
#loadmodule "modules/rpgserv/help";
#loadmodule "modules/rpgserv/info";
#loadmodule "modules/rpgserv/list";
#loadmodule "modules/rpgserv/search";
#loadmodule "modules/rpgserv/set";

/* BotServ modules.
 *
 * Here you can disable or enable certain features of BotServ, by
 * defining which modules are loaded. You can even disable BotServ
 * entirely.
 *
 * Core components                              modules/botserv/main
 * HELP command                                 modules/botserv/help
 * INFO command                                 modules/botserv/info
 * NPC commands (SAY, ACT)                      modules/botserv/bottalk
 * SET command (required for SET commands)      modules/botserv/set_core
 * SET FANTASY command                          modules/botserv/set_fantasy
 * SET NOBOT command                            modules/botserv/set_nobot
 * SET PRIVATE command                          modules/botserv/set_private
 * SET SAYCALLER command                        modules/botserv/set_saycaller
 */
#loadmodule "modules/botserv/main";
#loadmodule "modules/botserv/help";
#loadmodule "modules/botserv/info";
#loadmodule "modules/botserv/bottalk";
#loadmodule "modules/botserv/set_core";
#loadmodule "modules/botserv/set_fantasy";
#loadmodule "modules/botserv/set_nobot";
#loadmodule "modules/botserv/set_private";
#loadmodule "modules/botserv/set_saycaller";

/* HostServ modules.
 *
 * Here you can disable or enable certain features of HostServ, by
 * defining which modules are loaded. You can even disable HostServ
 * entirely.
 *
 * HostServ is a more complex, and optional virtual host management service.
 * Users wishing only to set vhosts need not use it (they can use the builtin
 * vhost management of NickServ instead).
 *
 * Core components                              modules/hostserv/main
 * HELP command                                 modules/hostserv/help
 * OFFER system                                 modules/hostserv/offer
 * ON and OFF commands                          modules/hostserv/onoff
 * REQUEST system                               modules/hostserv/request
 * VHOST and LISTVHOST commands                 modules/hostserv/vhost
 * VHOSTNICK command                            modules/hostserv/vhostnick
 * GROUP command                                modules/hostserv/group
 * DROP command                                 modules/hostserv/drop
 */
#loadmodule "modules/hostserv/main";
#loadmodule "modules/hostserv/help";
#loadmodule "modules/hostserv/onoff";
#loadmodule "modules/hostserv/offer";
#loadmodule "modules/hostserv/request";
#loadmodule "modules/hostserv/vhost";
#loadmodule "modules/hostserv/vhostnick";
#loadmodule "modules/hostserv/group";
#loadmodule "modules/hostserv/drop";

/* HelpServ modules.
 * HelpServ allows users to request help from network staff in a few different ways.
 *
 * Core components                              modules/helpserv/main
 * HELPME command                               modules/helpserv/helpme
 * Help Ticket system                           modules/helpserv/ticket
 * Service List                                 modules/helpserv/services
 *
 * The ticket system works like a bugtracker ot helpdesk ticket system, HELPME
 * works like a one-time alert. You should probably only load one of the two systems.
 */
#loadmodule "modules/helpserv/main";
#loadmodule "modules/helpserv/helpme";
#loadmodule "modules/helpserv/ticket";
#loadmodule "modules/helpserv/services";

/* Channel listing service.
 *
 * Allows users to list channels with more flexibility than the /list
 * command.
 *
 * Core components                              modules/alis/main
 */
#loadmodule "modules/alis/main";

/* StatServ module.
 * StatServ provides basic statistics and split tracking.
 *
 * Core components                              modules/statserv/main
 * CHANNEL command                              modules/statserv/channel
 * NETSPLIT command                             modules/statserv/netsplit
 * SERVER command                               modules/statserv/server
 */
loadmodule "modules/statserv/main";
#loadmodule "modules/statserv/channel";
loadmodule "modules/statserv/netsplit";
loadmodule "modules/statserv/server";

/* GroupServ module.
 * GroupServ allows users to create groups to easily mass-manage channel
 * access and more.
 *
 * Core components                              modules/groupserv/main
 * ACSNOLIMIT command                           modules/groupserv/acsnolimit
 * DROP command                                 modules/groupserv/drop
 * FDROP command                                modules/groupserv/fdrop
 * FFLAGS command                               modules/groupserv/fflags
 * FLAGS command                                modules/groupserv/flags
 * HELP command                                 modules/groupserv/help
 * INFO command                                 modules/groupserv/info
 * JOIN command                                 modules/groupserv/join
 * LIST command                                 modules/groupserv/list
 * LISTCHANS command                            modules/groupserv/listchans
 * REGISTER command                             modules/groupserv/register
 * REGNOLIMIT command                           modules/groupserv/regnolimit
 * INVITE command                               modules/groupserv/invite
 * SET command                                  modules/groupserv/set
 * SET CHANNEL command                          modules/groupserv/set_channel
 * SET DESCRIPTION command                      modules/groupserv/set_description
 * SET EMAIL command                            modules/groupserv/set_email
 * SET GROUPNAME command                        modules/groupserv/set_groupname
 * SET JOINFLAGS command                        modules/groupserv/set_joinflags
 * SET OPEN command                             modules/groupserv/set_open
 * SET PUBLIC command                           modules/groupserv/set_public
 * SET URL command                              modules/groupserv/set_url
 *
 */
loadmodule "modules/groupserv/main";
loadmodule "modules/groupserv/acsnolimit";
loadmodule "modules/groupserv/drop";
loadmodule "modules/groupserv/fdrop";
loadmodule "modules/groupserv/fflags";
loadmodule "modules/groupserv/flags";
loadmodule "modules/groupserv/help";
loadmodule "modules/groupserv/info";
loadmodule "modules/groupserv/join";
loadmodule "modules/groupserv/list";
loadmodule "modules/groupserv/listchans";
loadmodule "modules/groupserv/register";
loadmodule "modules/groupserv/regnolimit";
#loadmodule "modules/groupserv/invite";
loadmodule "modules/groupserv/set";
loadmodule "modules/groupserv/set_channel";
loadmodule "modules/groupserv/set_description";
loadmodule "modules/groupserv/set_email";
loadmodule "modules/groupserv/set_groupname";
loadmodule "modules/groupserv/set_joinflags";
loadmodule "modules/groupserv/set_open";
loadmodule "modules/groupserv/set_public";
loadmodule "modules/groupserv/set_url";

/*
 * Various modules.
 *
 * Atheme includes an optional HTTP server that can be used for integration
 * with portal software and other useful things. To enable it, load this
 * module, and uncomment the httpd { } block towards the bottom of the config.
 *
 * HTTP Server                                  modules/misc/httpd
 */
loadmodule "modules/misc/httpd";

/* XMLRPC server module.
 * 
 * The XML-RPC handler requires modules/misc/httpd to be loaded as it merely
 * registers a path handler for XML-RPC. The path used for XML-RPC is /xmlrpc.
 *
 * XMLRPC handler for the httpd                 modules/transport/xmlrpc
 */
loadmodule "modules/transport/xmlrpc";

/* Extended target entity types. [EXPERIMENTAL]
 *
 * Atheme can set up special target mapping entities which match multiple
 * users in channel access entries.  These target mapping entity types are
 * defined through the 'exttarget' modules listed below.
 *
 * Exttarget handling core                      modules/exttarget/main
 * $oper exttarget match type                   modules/exttarget/oper
 * $registered exttarget match type             modules/exttarget/registered
 * $channel exttarget match type                modules/exttarget/channel
 * $chanacs exttarget match type                modules/exttarget/chanacs
 * $server exttarget match type                 modules/exttarget/server
 */
#loadmodule "modules/exttarget/main";
#loadmodule "modules/exttarget/oper";
#loadmodule "modules/exttarget/registered";
#loadmodule "modules/exttarget/channel";
#loadmodule "modules/exttarget/chanacs";
#loadmodule "modules/exttarget/server";

/* Proxyscan (DNSBL) modules.
 *
 * Atheme can also check set DNS Blacklists for matches and respond 
 * as set.  Activate modules here and customize further down under Proxyscan
 * section.
 */
#loadmodule "modules/proxyscan/main";
#loadmodule "modules/proxyscan/dnsbl";

/* Other modules.
 *
 * Put any other modules you want to load on startup here. The path
 * is relative to PREFIX or PREFIX/lib/atheme, depending on how Atheme
 * was compiled.
 */
#loadmodule "modules/contrib/ns_listlogins";

/******************************************************************************
 * SERVICES RUNTIME CONFIGURATION SECTION.                                    *
 ******************************************************************************/

/*
 * If you are using modules/crypto/argon2d, you may wish to edit this
 * block. It is recommended to either leave the values at their defaults,
 * or experiment with them so that it takes approximately 0.5-1.0 seconds
 * for users to identify. Services blocks while the digest is being
 * computed or verified, so don't set these too large, or people can hang
 * services by trying many password attempts at once.
 */
argon2d {

	/* memory cost (as a power of 2, in KiB)
	 * Valid values are 8 (256 KiB) to 20 (1 GiB) (inclusive)
	 * The default is 14
	 */
	#memory = 14;      /* 2^14 KiB == 16384 KiB (16 MiB) */

	/* time cost (iterations over the memory)
	 * Valid values are 4 to 16384 (inclusive)
	 * The default is 32
	 */
	#time = 32;
};

/*
 * If you are using modules/crypto/pbkdf2v2, you may wish to edit this
 * block. See the comment on the argon2d {} block above for advice
 * regarding parameter choice that also applies here.
 */
pbkdf2v2 {

	/* digest
	 * Valid values are "SHA1", "SHA256" and "SHA512"
	 * The default is "SHA512"
	 */
	#digest = "SHA512";

	/* rounds
	 * Valid values are 10000 to 5000000 (inclusive)
	 * The default is 64000
	 */
	#rounds = 64000;
};

/* The serverinfo{} block defines how we appear on the IRC network. */
serverinfo {
	/* name
	 * The server name that this program uses on the IRC network.
	 * This is the name you'll have to use in C:/N:Lines. It must be
	 * unique on the IRC network and contain at least one dot, but does
	 * not have to be equal to any DNS name.
	 */
	name = "services.int";

	/* desc
	 * The ``server comment'' we send to the IRC network.
	 */
	desc = "Atheme IRC Services";

	/* numeric
	 * Some protocol drivers (Charybdis, Ratbox2, P10, IRCNet)
	 * require a server id, also known as a numeric. Please consult your
	 * ircd's documentation when providing this value. 
	 */
	numeric = "00A";

	/* (*)recontime
	 * The number of seconds before we reconnect to the uplink.
	 */
	recontime = 10;

	/* (*)netname
	 * The name of your network.
	 */
	netname = "misconfigured network";

	/* (*)hidehostsuffix
	 * P10 +x host hiding gives <account>.<hidehostsuffix>.
	 * If using +x on asuka, this must agree
	 * with F:HIDDEN_HOST.
	 */
	hidehostsuffix = "users.misconfigured";

	/* (*)adminname
	 * The name of the person running this service.
	 */
	adminname = "misconfigured admin";

	/* (*)adminemail
	 * The email address of the person running this service.
	 */
	adminemail = "misconfigured@admin.tld";

	/* (*)registeremail
	 * The email address that messages should be originated from.
	 * If this is not set, then "noreply.$adminemail" will be used.
	 */
	registeremail = "noreply@admin.tld";

	/* (*)hidden
	 * If this is enabled, Atheme will indicate to the uplink IRCd
	 * that it should not be included in /links output.  This only works
	 * on the following IRCds at present: charybdis, ircd-seven, ratbox.
	 */
	#hidden;

	/* (*)mta
	 * The full path to your mail transfer agent.
	 * This is used for email authorization and password retrieval.
	 * Comment this out to disable sending email.
	 * Warning: sending email can disclose the IP of your services
	 * unless you take precautions (not discussed here further).
	 */
	mta = "/usr/sbin/sendmail";

	/* (*)loglevel
	 * Specify the default categories of logging information to record
	 * in the master Atheme logfile, usually var/atheme.log.
	 *
	 * Options include:
	 *      debug, all      - meta-keyword for all possible categories
	 *      trace           - meta-keyword for a little bit of info
	 *      misc            - like trace, but with some more miscellaneous info
	 *      notice          - meta-keyword for notice-like information
	 * ------------------------------------------------------------------------------
	 *      error           - critical errors
	 *      info            - miscillaneous log notices
	 *      verbose         - A bit more verbose than info, not quite as spammy as debug
	 *      commands        - all command use
	 *      admin           - administrative command use
	 *      register        - account and channel registrations
	 *      set             - changes of account or channel settings
	 *      request         - user requests (currently only vhosts)
	 *      network         - log notices related to network status
	 *      rawdata         - log raw data sent and received by services
	 *      wallops         - <not yet used>
	 */
	loglevel = { error; info; admin; network; wallops; };

	/* (*)maxlogins
	 * What is the maximum number of sessions allowed to login to one
	 * username? This reduces potential abuse. It is only checked on login.
	 */
	maxlogins = 5;

	/* (*)maxusers
	 * What are the maximum usernames that one email address can register?
	 * Set to 0 to disable this check (it can be slow currently).
	 */
	maxusers = 5;

	/* (*)mdlimit
	 * How many metadata entries can be added to an object?
	 */
	mdlimit = 30;

	/* (*)emaillimit, emailtime
	 * The maximum number of emails allowed to be sent in
	 * that amount of time (seconds). If this is exceeded,
	 * wallops will be sent, at most one per minute.
	 */
	emaillimit = 10;
	emailtime = 300;

	/* (*)auth
	 * What type of username registration authorization do you want?
	 * If "email", Atheme will send a confirmation email to the address to
	 * ensure it's valid. If registration is not completed within one day,
	 * the username will expire. If "none", no message will be sent and
	 * the username will be fully registered.
	 * Valid values are: email, none.
	 */
	auth = none;

	/* casemapping
	 * Specify the casemapping to use. Almost all TSora (and any that follow
	 * the RFC correctly) ircds will use rfc1459 casemapping. Bahamut, Unreal,
	 * and other ``Dalnet'' ircds will use ascii casemapping.
	 * Valid values are: rfc1459, ascii.
	 */
	casemapping = rfc1459;
};

/* uplink{} blocks define connections to IRC servers.
 * Multiple may be defined but only one will be used at a time (IRC
 * being a tree shaped network). Atheme does not currently link over SSL.
 * To link Atheme over ssl, please connect Atheme to a local ircd and have that
 * connect to your network over SSL.
 */
uplink "irc.example.net" {
	// The server name of the ircd you're linking to goes above.

	// host
	// The hostname to connect to.
	host = "127.0.0.1";

	// vhost
	// The source IP to connect from, used on machines with multiple interfaces.
	#vhost = "192.0.2.5";

	// send_password
	// The password sent for linking.
	send_password = "mypassword";

	// receive_password
	// The password received for linking.
	receive_password = "theirpassword";

	// port
	// The port to connect to.
	port = 6667;
};

/* this is an example for using an IPv6 address as an uplink */
uplink "irc6.example.net" {
	host = "::1";

	// password
	// If you want to have same send_password and accept_password, you
	// can specify both using 'password' instead of individually.
	password = "linkage";

	port = 6667;
};

/* Services configuration.
 *
 * Each of these blocks can contain a nick, user, host, real and aliases.
 * Several of them also have options specific to the service.
 */

/* NickServ configuration.
 *
 * The nickserv {} block contains settings specific to the NickServ modules.
 *
 * NickServ provides nickname or username registration and authentication
 * services. It provides necessary authentication features required for
 * Services to operate correctly. You should make sure these settings
 * are properly configured for your network.
 */
nickserv {
	/* (*)spam
	 * Have NickServ tell people about how great it and ChanServ are.
	 */
	#spam;

	/* no_nick_ownership
	 * Enable this to disable nickname ownership (old userserv{}).
	 * This changes changes "nickname" to "account" in most messages,
	 * disables GHOST on users not logged in to the same account and
	 * makes the spam directive ineffective.
	 * It is suggested that the nick be set to UserServ, login.so
	 * be loaded instead of identify.so and ghost.so not be loaded.
	 */
	no_nick_ownership;

	/* (*)nick
	 * The nickname we want NickServ to have. 
	 */
	nick = "UserServ";

	/* (*)user
	 * The username we want NickServ to have.
	 */
	user = "UserServ";

	/* (*)host
	 * The hostname we want NickServ to have.
	 */
	host = "services.int";

	/* (*)real
	 * The realname (gecos) information we want NickServ to have.
	 */
	real = "User Registration Services";

	/* (*)aliases
	 * Command aliases for NickServ.
	 */
	aliases {
		"ID" = "IDENTIFY";
		"MYACCESS" = "LISTCHANS";
	};

	/* (*)access
	 * This block allows you to modify the access level required to run
	 * commands. The list of possible accesses are listed in the operclass
	 * section later in this .conf . Note that you can only set the access
	 * on an actual command, not an alias.
	 */
	access {
	};

	/* (*)maxnicks
	 * If GROUP is loaded, what are the maximum nicknames that one
	 * username can register?
	 */
	maxnicks = 5;

	/* (*)expire
	 * The number of days before inactive registrations are expired.
	 */
	expire = 30;

	/* (*)enforce_expire
	 * The number of days of no use after which to ignore enforcement
	 * settings on nicks.
	 */
	#enforce_expire = 14;

	/* (*)enforce_delay
	 * The number of seconds to delay nickchange enforcement settings
	 * on nicks.
	 */
	#enforce_delay = 30;
	
	/* (*)enforce_prefix
	 * The prefix to use when changing the user's nick on enforcement
	 */
	#enforce_prefix = "Guest";

	/* (*)cracklib_dict
	 * The location and filename prefix of the cracklib dictionaries
	 * for use with nickserv/cracklib. This must be provided if you are
	 * going to be using nickserv/cracklib.
	 */
	#cracklib_dict = "/var/cache/cracklib/cracklib_dict";

	/* (*)cracklib_warn
	 * If this option is set and nickserv/cracklib is loaded, nickserv will just 
	 * warn users that their password is insecure, recommend they change it and 
	 * still register the nick. If this option is unset, it will refuse to
	 * register the nick at all until the user chooses a better password.
	 */
	#cracklib_warn;

	/* (*)emailexempts
	 * A list of email addresses that will be exempt from the check of how many
	 * accounts one user may have. Any email address in this block may register
	 * an unlimited number of accounts/usernames.
	 */
	emailexempts {
	};
};

/* ChanServ configuration.
 *
 * The chanserv {} block contains settings specific to the ChanServ modules.
 *
 * ChanServ provides channel registration services, which allows users to own
 * channels. It is not required, but is strongly recommended.
 */
chanserv {
	/* (*)nick
	 * The nickname we want the client to have.
	 */
	nick = "ChanServ";

	/* (*)user
	 * The username we want the client to have.
	 */
	user = "ChanServ";

	/* (*)host
	 * The hostname we want the client to have.
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS of the client.
	 */
	real = "Channel Services";

	/* (*)aliases
	 * Command aliases for ChanServ.
	 */
	aliases {
	};
	
	/* (*)access
	 * Command access changes for ChanServ.
	 */
	access {
	};

	/* (*)maxchans
	 * What are the maximum channels that one username can register?
	 */
	maxchans = 5;

	/* fantasy
	 * Do you want to enable fantasy commands? This can
	 * use a lot of CPU up, and will only work if you have
	 * join_chans (in general) enabled as well.
	 */
	fantasy;

	/* (*) hide_xop
	 * Hide the XOP templates from sight.  This is useful if you
	 * want to use templates and not have the XOP templates displayed.
	 */
	#hide_xop;

	/* (*) templates
	 * Defines what flags the global templates comprise.
	 *
	 * For the special XOP templates:
	 * These should all be different and not equal to the empty set,
	 * except that hop may be equal to vop to disable hop.
	 * Each subsequent level should have more flags (except +VHO).
	 * For optimal functioning of /cs forcexop, aop should not have
	 * any of +sRf, hop should not have any of +sRfoOr and vop should 
	 * not have any of +sRfoOrhHt.
	 * If this is not specified, the values of Atheme 0.3 are used,
	 * which are generally less intuitive than these.
	 * Note: changing these leaves the flags of existing channel access
	 * entries unchanged, thus removing them of the view of /cs xop list.
	 * Usually the channel founder can use /cs forcexop to update the
	 * entries to the new levels.
	 *
	 * Advice:
	 * If you want to add a co-founder role, remove the flags permission
	 * from the SOP role, and define a co-founder role with flags
	 * permissions.
	 */
	templates {
		vop = "+AV";
		hop = "+AHehitrv";
		aop = "+AOehiortv";
		sop = "+AOaefhiorstv";

		founder = "+AFORaefhiorstv";

		/* some examples (which are commented out...) */
		#member = "+Ai";
		#op = "+AOiortv";
	};

	/* (*) deftemplates
	 * Defines default templates to set on new channels, as a
	 * space-separated list of name=+flags pairs.
	 * Note: at this time no syntax checking is done on this; it
	 * is your own responsibility to make sure it is correct.
	 */
	#deftemplates = "MEMBER=+Ai OP=+AOeiortv";

	/* (*) changets
	 * Change the channel TS to the registration time when someone
	 * recreates a registered channel, ensuring that they are deopped
	 * and all their modes are undone. Note that this involves ChanServ
	 * joining. When the channel was not recreated no deops will be done
	 * (apart from the SECURE option).
	 * This also solves the "join-mode" problem where someone recreates
	 * a registered channel and then sets some modes before they are
	 * deopped.
	 * This is currently supported for charybdis, ratbox, bahamut,
	 * and inspircd 1.1+. For charybdis and ratbox it only fully
	 * works with TS6, with TS5 bans and last-moment modes will
	 * still apply.
	 * (That can also be used to advantage, when first enabling this.)
	 */
	#changets;

	/* (*) trigger
	 * This setting allows you to change the trigger prefix for
	 * ChanServ's in-channel command feature (disableable via chanserv::fantasy).
	 * If no setting is provided, the default is used, which is "!".
	 *
	 * Other settings you could consider trying: ".", "~", "?", "`", "'".
	 */
	trigger = "!";

	/* (*)expire
	 * The number of days before inactive registrations are expired.
	 */
	expire = 30;

	/* (*)maxchanacs
	 * The maximum number of entries allowed in a channel's access list
	 * (both channel ops and akicks), 0 for unlimited.
	 */
	maxchanacs = 0;

	/* (*)maxfounders
	 * The maximum number of founders allowed in a channel.
	 * Note that all founders have the exact same privileges and
	 * the list of founders is shown in various places.
	 */
	maxfounders = 4;

	/* (*)founder_flags
	 * The flags a user will get when they register a new channel.
	 * This MUST include at least 'F' or it will be ignored.
	 * If it is not set, Atheme will give the user all channel flags.
	 */
	#founder_flags = "AFORefiorstv";

	/* (*)akick_time
	 * The default expiration time (in minutes) for AKICKs.
	 * Comment this option out or set to zero for permanent AKICKs
	 * by default (the old behaviour).
	 */
	#akick_time = 10;

	/* (*)antiflood_enforce_method
	 * The enforcement method to use for flood protection by default.
	 * This may be overridden by channel staff.
	 * Available options are: quiet, kickban and akill.
	 */
	antiflood_enforce_method = quiet;
};

/* CHANFIX configuration.
 *
 * The chanfix {} block contains settings specific to the CHANFIX modules.
 *
 * CHANFIX provides channel recovery services without registration, which
 * allows users to maintain control of channels even if ChanServ is not used
 * to register them.
 */
chanfix {
	/* (*)nick
	 * The nickname we want the client to have.
	 */
	nick = "ChanFix";

	/* (*)user
	 * The username we want the client to have.
	 */
	user = "ChanFix";

	/* (*)host
	 * The hostname we want the client to have.
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS of the client.
	 */
	real = "Channel Fixing Service";

	/* (*)autofix
	 * Automatically fix channels if they become opless and meet fixing
	 * criteria.
	 */
	autofix;
};

/* Global noticing configuration.
 *
 * The global {} block contains settings specific to the Global notice module.
 *
 * The Global notice module provides the ability to mass-notify a network.
 */
global {
	/* (*)nick
	 * Sets the nick used for sending out a global notice.
	 */
	nick = "Global";

	/* (*)user
	 * Sets the username used for this client.
	 */
	user = "Global";

	/* (*)host
	 * The hostname used for this client.
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS (real name) of the client.
	 */
	real = "Network Announcements";
};

/* InfoServ configuration
 *
 * The infoserv {} block contains settings specific to the InfoServ module.
 *
 * The InfoServ modules provides the ability to mass-notify a network and send
 * news to users when they connect to the network.
 */
infoserv {
	/* (*)nick
	 * Sets the nick used for InfoServ and sending out informational messages.
	 */
	nick = "InfoServ";

	/* (*)user
	 * Sets the username used for this client.
	 */
	user = "InfoServ";

	/* (*)host
	 * The hostname used for this client,
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS (real name) of the client.
	 */
	real = "Information Service";

	/* (*)logoninfo_count
	 * The number of InfoServ messages a user will see upon connect.
	 * If there are more than this number, the user will be able to
	 * see the rest with /msg infoserv list .
	 */
	logoninfo_count = 3;
};

/* OperServ configuration.
 *
 * The operserv {} block contains settings specific to the OperServ modules.
 *
 * OperServ provides essential network management tools for IRC operators
 * on the IRC network.
 */
operserv {
	/* (*)nick
	 * The nickname we want the Operator Service to have.
	 */
	nick = "OperServ";

	/* (*)user
	 * Sets the username used for this client.
	 */
	user = "OperServ";

	/* (*)host
	 * The hostname used for this client.
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS (real name) of the client.
	 */
	real = "Operator Services";

	/* (*)aliases
	 * Command aliases for OperServ.
	 */
	aliases {
	};
	
	/* (*)access
	 * Command access changes for OperServ.
	 */
	access {
	};
};

/* SaslServ configuration.
 *
 * The saslserv {} block contains settings specific to the SaslServ modules.
 *
 * SaslServ provides an authentication agent which is compatible with the
 * SASL over IRC (SASL/IRC) protocol extension.
 */
saslserv {
	/* (*)nick
	 * The nickname we want SaslServ to have.
	 */
	nick = "SaslServ";

	/* (*)user
	 * The username we want SaslServ to have.
	 */
	user = "SaslServ";

	/* (*)host
	 * The hostname we want SaslServ to have.
	 */
	host = "services.int";

	/* (*)real
	 * The realname (gecos) information we want SaslServ to have.
	 */
	real = "SASL Authentication Agent";

	/* (*)hide_server_names
	 * Hide server names in the bad_password message.
	 */
	#hide_server_names;
};

/* MemoServ configuration.
 *
 * The memoserv {} block contains settings specific to the MemoServ modules.
 *
 * MemoServ provides a note-taking service that you can use to send notes
 * to offline users (provided they are registered with Services).
 */
memoserv {
	/* (*)nick
	 * The nickname we want MemoServ to have.
	 */
	nick = "MemoServ";

	/* (*)user
	 * The username we want MemoServ to have.
	 */
	user = "MemoServ";

	/* (*)host
	 * The hostname we want MemoServ to have.
	 */
	host = "services.int";

	/* (*)real
	 * The realname (gecos) information we want MemoServ to have.
	 */
	real = "Memo Services";

	/* (*)aliases
	 * Command aliases for MemoServ.
	 */
	aliases {
	};
	
	/* (*)access
	 * Command access changes for MemoServ.
	 */
	access {
	};

	/* (*)maxmemos
	 * What is the maximum amount of memos a user can have in their inbox?
	 */
	maxmemos = 30;
};

/* GameServ configuration.
 *
 * The gameserv {} block contains settings specific to the GameServ modules.
 *
 * GameServ provides various in-channel commands for games.
 */
gameserv {
	/* (*)nick
	 * The nickname we want GameServ to have.
	 */
	nick = "GameServ";

	/* (*)user
	 * Sets the username used for this client.
	 */
	user = "GameServ";

	/* (*)host
	 * The hostname used for this client.
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS (real name) of the client.
	 */
	real = "Game Services";

	/* (*)aliases
	 * Command aliases for GameServ.
	 */
	aliases {
	};
	
	/* (*)access
	 * Command access changes for GameServ.
	 */
	access {
	};
};

/* RPGServ configuration.
 *
 * The rpgserv {} block contains settings specific to the RPGServ modules.
 *
 * RPGServ provides a facility for finding roleplaying channels.
 */
rpgserv {
	/* (*)nick
	 * The nickname we want RPGServ to have.
	 */
	nick = "RPGServ";

	/* (*)user
	 * Sets the username used for this client.
	 */
	user = "RPGServ";

	/* (*)host
	 * The hostname used for this client.
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS (real name) of the client.
	 */
	real = "RPG Finding Services";

	/* (*)aliases
	 * Command aliases for RPGServ.
	 */
	aliases {
	};
	
	/* (*)access
	 * Command access changes for RPGServ.
	 */
	access {
	};
};

/* BotServ configuration.
 *
 * The botserv {} block contains settings specific to the BotServ modules.
 *
 * BotServ provides virtual channel bots.
 */
botserv {
	/* (*)nick
	 * The nickname we want BotServ to have.
	 */
	nick = "BotServ";

	/* (*)user
	 * Sets the username used for this client.
	 */
	user = "BotServ";

	/* (*)host
	 * The hostname used for this client.
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS (real name) of the client.
	 */
	real = "Bot Services";

	/* (*)min_users
	 * Minimum number of users a channel must have before a Bot is allowed
	 * to be assigned to that channel.
	 */
	min_users = 0;
};

/* GroupServ configuration.
 *
 * The groupserv {} block contains settings specific to the GroupServ modules.
 *
 * GroupServ provides features for managing a collection of channels at once.
 *
 */
groupserv {
	/* (*)nick
	 * The nickname we want GroupServ to have.
	 */
	nick = "GroupServ";

	/* (*)user
	 * The username we want GroupServ to have.
	 */
	user = "GroupServ";

	/* (*)host
	 * The hostname we want GroupServ to have.
	 */
	host = "services.int";

	/* (*)real
	 * The realname (gecos) information we want GroupServ to have.
	 */
	real = "Group Management Services";

	/* (*)aliases
	 * Command aliases for GroupServ.
	 */
	aliases {
	};
	
	/* (*)access
	 * Command access changes for GroupServ.
	 */
	access {
	};

	/* (*)maxgroups
	 * Maximum number of groups one username can be founder of.
	 */
	maxgroups = 5;

	/* (*)maxgroupacs
	 * Maximum number of access entries you may have in a group.
	 */
	maxgroupacs = 100;

	/* (*)enable_open_groups
	 * Setting this option will allow any group founder to mark
	 * their group as "anyone can join".
	 */
	enable_open_groups;

	/* (*)join_flags
	 * This is the GroupServ flagset that users who JOIN a open
	 * group will get upon join. Please check the groupserv/flags
	 * helpfile before changing this option. Valid flagsets (for
	 * example) would be: "+v" or "+cv". It is not valid to use
	 * minus flags (such as "-v") here.
	 */
	join_flags = "+";
};

/* HostServ configuration.
 *
 * The hostserv {} block contains settings specific to the HostServ modules.
 *
 * HostServ provides advanced virtual host management.
 */
hostserv {
	/* (*)nick
	 * The nickname we want HostServ to have.
	 */
	nick = "HostServ";

	/* (*)user
	 * Sets the username used for this client.
	 */
	user = "HostServ";

	/* (*)host
	 * The hostname used for this client.
	 */
	host = "services.int";

	/* (*)real
	 * The GECOS (real name) of the client.
	 */
	real = "Host Management Services";

	/* (*)request_per_nick
	 * Whether the request system should work per nick or per account.
	 * The recommended setting is to leave this disabled, so that
	 * vhosts work as consistently as possible.
	 */
	#request_per_nick;

	/* (*)aliases
	 * Command aliases for HostServ.
	 */
	aliases {
		"APPROVE" = "ACTIVATE";
		"DENY" = "REJECT";
	};
	
	/* (*)access
	 * Command access changes for HostServ.
	 */
	access {
	};
};

/* HelpServ configuration
 *
 * The helpserv {} block contains settings specific to the HelpServ modules.
 *
 * HelpServ adds a few different ways for users to request help from network staff.
 */
helpserv {
	/* (*)nick
	 * The nickname we want HelpServ to have.
	 */
	nick = "HelpServ";

	/* (*)user
	 * The username we want HelpServ to have.
	 */
	user = "HelpServ";

	/* (*)host
	 * The hostname we want HelpServ to have.
	 */
	host = "services.int";

	/* (*)real
	 * The realname (gecos) information we want HelpServ to have.
	 */
	real = "Help Services";
};

/* StatServ configuration
 *
 * The statserv {} block contains settings specific to the StatServ modules.
 *
 * StatServ adds basic stats and split tracking.
 */
statserv {
	/* (*)nick
	 * The nickname we want StatServ to have.
	 */
	nick = "StatServ";

	/* (*)user
	 * The username we want StatServ to have.
	 */
	user = "StatServ";

	/* (*)host
	 * The hostname we want StatServ to have.
	 */
	host = "services.int";

	/* (*)real
	 * The realname (gecos) information we want StatServ to have.
	 */
	real = "Statistics Services";
};

/* ALIS configuration.
 *
 * The alis {} block contains settings specific to the ALIS modules.
 */
alis {
	/* (*)nick
	 * The nickname we want ALIS to have.
	 */
	nick = "ALIS";

	/* (*)user
	 * The username we want ALIS to have.
	 */
	user = "alis";

	/* (*)host
	 * The hostname we want ALIS to have.
	 */
	host = "services.int";

	/* (*)real
	 * The realname (gecos) information we want ALIS to have.
	 */
	real = "Channel Directory";
};

/* HTTP server configuration.
 *
 * The httpd {} block contains settings specific to the HTTP server module.
 *
 * The HTTP server in Services is used for serving XMLRPC requests. It can
 * also serve static documents and statistics pages.
 */
httpd {
	/* host
	 * The host that the HTTP server will listen on.
	 * Use 0.0.0.0 if you want to listen on all available hosts.
	 */
	host = "0.0.0.0";

	/* host (ipv6)
	 * If you want, you can have Atheme listen on an IPv6 host too.
	 * Use :: if you want to listen on all available IPv6 hosts.
	 */
	#host = "::";

	/* www_root
	 * The directory that contains the files that should be served by the httpd.
	 */
	www_root = "/var/www";

	/* port
	 * The port that the HTTP server will listen on.
	 */
	port = 8080;
};

/* LDAP configuration.
 *
 * The ldap {} block contains settings specific to the LDAP authentication
 * module.
 */
ldap {
	/* (*)url
	 * LDAP URL of the server to use.
	 */
	url = "ldap://127.0.0.1";

	/* (*)dnformat
	 * Format string to convert an account name to an LDAP DN.
	 * Must contain exactly one %s which will be replaced by the account
	 * name.
	 * Services will attempt a simple bind with this DN and the given
	 * password; if this is successful the password is considered correct.
	 */
	dnformat = "cn=%s,dc=jillestest,dc=com";
};

/******************************************************************************
 * LOGGING SECTION.                                                           *
 ******************************************************************************/

/*
 * logfile{} blocks can be used to set up log files other than the master
 * logfile used by services, which is controlled by serverinfo::loglevel.
 *
 * The various logging categories are:
 *      debug, all      - meta-keyword for all possible categories
 *      trace           - meta-keyword for a little bit of info
 *      misc            - like trace, but with some more miscillaneous info
 *      notice          - meta-keyword for notice-like information
 * ------------------------------------------------------------------------------
 *      error           - critical errors
 *      info            - miscillaneous log notices
 *      verbose         - A bit more verbose than info, not quite as spammy as debug
 *      commands        - all command use
 *      admin           - administrative command use
 *      register        - account and channel registrations
 *      set             - changes of account or channel settings
 *      request         - user requests (currently only vhosts)
 *      network         - log notices related to network status
 *      rawdata         - log raw data sent and received by services
 *      wallops         - <not yet used>
 *      denycmd         - security model denials (commands, permissions)
 */

/*
 * This block logs all account and channel registrations and drops,
 * and account and channel setting changes to var/account.log.
 */
logfile "var/account.log" { register; set; };

/*
 * This block logs all command use to var/commands.log.
 */
logfile "var/commands.log" { commands; };

/*
 * This block logs all security auditing information.
 */
logfile "var/audit.log" { denycmd; };

/*
 * You can log to IRC channels, and even split it by category, too.
 * This entry provides roughly the same functionality as the old snoop
 * feature.
 */
logfile "#services" { error; info; admin; request; register; denycmd; };

/*
 * This block logs to server notices.
 */
logfile "!snotices" { error; info; request; denycmd; };

/******************************************************************************
 * GENERAL PARAMETERS CONFIGURATION SECTION.                                  *
 ******************************************************************************/

/* The general {} block defines general configuration options. */
general {
	/* (*)permissive_mode
	 * Whether or not security denials should be soft denials instead of
	 * hard denials.  If security denials are soft denials, then they will
	 * only be logged to the denial log.
	 */
	#permissive_mode;

	/* (*)helpchan
	 * Network help channel. Shown to users when they request
	 * help for a command that doesn't exist.
	 */
	#helpchan = "#help";

	/* (*)helpurl
	 * Network webpage for services help. Shown to users when they
	 * request help for a command that doesn't exist.
	 */
	#helpurl = "http://www.stack.nl/~jilles/irc/atheme-help/";

	/* (*)silent
	 * If you want to prevent services from sending
	 * WALLOPS/GLOBOPS about things uncomment this.
	 * Not recommended.
	 */
	#silent;

	/* (*)verbose_wallops
	 * If you want services to send you more information about
	 * events that are occuring (in particular AKILLs), uncomment the
	 * directive below.
	 *
	 * WARNING! This may result in large amounts of wallops/globops
	 * floods.
	 */
	#verbose_wallops;

	/* (*)join_chans
	 * Should ChanServ be allowed to join registered channels?
	 * This option is useful for the fantasy command set.
	 *
	 * If enabled, you can tell ChanServ to join via SET GUARD ON.
	 *
	 * If you use ircu-like ircd (asuka), you must
	 * leave this enabled, and put guard in default cflags.
	 *
	 * For ratbox it is recommended to leave it on and put guard in 
	 * default cflags, in order that ChanServ does not have to join/part
	 * to do certain things. On the other hand, enabling this increases
	 * potential for bots fighting with ChanServ.
	 *
	 * Regardless of this option, ChanServ will temporarily join 
	 * channels which would otherwise be empty if necessary to enforce
	 * akick/restricted/close, and to change the TS if changets is
	 * enabled.
	 */
	join_chans;

	/* (*)leave_chans
	 * Do we leave registered channels after everyone else has left?
	 * Turning this off serves little purpose, except to mark "official"
	 * network channels by keeping them open, and to preserve the
	 * topic and +beI lists.
	 */
	leave_chans;

	/* secure
	 * Do you want to require the use of /msg <service>@<services host>?
	 * Turning this on helps protect against spoofers, but is disabled
	 * as most networks do not presently use it.
	 */
	#secure;

	/* (*)uflags
	 * The default flags to set for usernames upon registration.
	 * Valid values are: hold, neverop, noop, hidemail, nomemo, emailmemos,
	 * enforce, privmsg, private, quietchg and none.
	 */
	uflags = { hidemail; };

	/* (*)cflags
	 * The default flags to set for channels upon registration.
	 * Valid values are: hold, secure, verbose, verbose_ops, keeptopic,
	 * topiclock, guard, private, nosync, limitflags, pubacl and none.
	 */
	cflags = { verbose; guard; };

	/* (*)raw
	 * Do you want to allow SRAs to use the RAW and INJECT commands?
	 * These commands are for debugging. If you don't know how to use them
	 * then don't enable them. They are not supported.
	 */
	#raw;

	/* (*)flood_msgs
	 * Do you want services to detect floods?
	 * Set to how many messages before a flood is triggered.
	 * Note that some messages that need a lot of processing count
	 * as two or four messages.
	 * If services receives `flood_msgs' within `flood_time' the user will
	 * trigger the flood protection.
	 * Setting this to zero disables flood protection.
	 */
	flood_msgs = 7;

	/* (*)flood_time
	 * Do you want services to detect floods?
	 * Set to how long before the counter resets.
	 * If services receives `flood_msgs' within `flood_time' the user will
	 * trigger the flood protection.
	 */
	flood_time = 10;

	/* (*)ratelimit_uses
	 * After how many uses of a command will users be throttled.
	 * After `ratelimit_uses' of a command within `ratelimit_period', users
	 * will not be able to run that ratelimited command until the period is up.
	 * Comment this, ratelimit_period below or both options out to disable rate limiting.
	 * Currently used in helpserv/helpme, helpserv/ticket, hostserv/request, 
	 * nickserv/register and chanserv/register.
	 */
	ratelimit_uses = 5;

	/* (*)ratelimit_period
	 * After how much time (in seconds) will the ratelimit_uses counter reset.
	 * After `ratelimit_uses' of a command within `ratelimit_period', users
	 * will not be able to run that ratelimited command until the period is up.
	 * Comment this, ratelimit_uses above or both options out to disable rate limiting.
	 * Currently used in helpserv/helpme, helpserv/ticket, hostserv/request, 
	 * nickserv/register and chanserv/register.
	 */
	ratelimit_period = 60;

	/* (*)kline_time
	 * The default expire time for KLINE's in days.
	 * Setting this to 0 makes all KLINE's permanent.
	 */
	kline_time = 7;

	/* (*)kline_with_ident
	 * KLINE user@host instead of *@host.
	 * Applies to all automatic KLINE's set by services.
	 */
	#kline_with_ident;

	/* (*)kline_verified_ident
	 * KLINE *@host if the first character of the ident is ~,
	 * irrespective of the value of kline_with_ident.
	 */
	#kline_verified_ident;

	/* (*)clone_time
	 * This is the default expiry time for CLONE exemptions in minutes.
	 * Setting this to 0 makes all CLONE exemptions permanent.
	 */
	clone_time = 0;

	/* commit_interval
	 * The time between database writes in minutes.
	 */
	commit_interval = 5;

	/* (*)default_clone_allowed
	 * The limit after which clones will be KILLed or TKLINEd.
	 * Used by operserv/clones.
	 */
	default_clone_allowed = 5;

	/* (*)default_clone_warn
	 * The limit after which clones will be warned that they may not
	 * have any more concurrent connections. Should be lower than
	 * default_clone_allowed . Used by operserv/clones.
	 */
	default_clone_warn = 4;

	/* (*)clone_identified_increase_limit
	 * If this option is enabled, the clone limit for a IP/host will
	 * be increased by 1 per clone that's identified to services.
	 * This has a limit of double the clone limits above.
	 */
	clone_identified_increase_limit;

	/* (*)uplink_sendq_limit
	 * The maximum amount of data that may be queued to be sent
	 * to the uplink, in bytes. This should be enough to contain
	 * Atheme's response to the netburst, but smaller than the
	 * IRCd's sendq limit for servers.
	 */
	uplink_sendq_limit = 1048576;

	/* (*)language
	 * Language to use for channel and oper messages and as default
	 * for users.
	 */
	language = "en";

	/* exempts
	 * This block contains a list of user@host masks. Users matching any
	 * of these will not be automatically K:lined by services.
	 */
	exempts {
	};

	/* allow_taint
	 * By enabling this option, Atheme will run in configurations where
	 * the upstream will not provide support.  By enabling this feature,
	 * you void any perceived rights to support.
	 */
	#allow_taint;

	/* (*)immune_level
	 * This option allows you to customize the operlevel which gets kick
	 * immunity privileges.
	 *
	 * The following flags are available:
	 *    immune - require whatever ircd usermode is needed for kick
	 *             immunity (this is the default);
	 *    admin  - require admin privileges for kick immunity
	 *    ircop  - require any ircop privileges for kick immunity (umode +o) 
	 */
	immune_level = immune;

	/* show_entity_id
	 * This makes nick/user & group entity IDs visible to everyone, rather
	 * than just opers with user:auspex or group:auspex privileges.
	 */
	show_entity_id;
};

proxyscan {
	/* Here you can configure the details of your Proxyscan (DNS Blacklist)
	 * scanner service.  
	 */

	nick = "Proxyscan";
	user = "dnsbl";
	host = "services.int";
	real = "Proxyscan Service";

	blacklists {
	 "dnsbl.dronebl.org";
	 "rbl.efnetrbl.org";
	 "tor.efnet.org";
	};
	
	/* Available dnsbl_action's:
	 * NONE - Do nothing
	 * NOTIFY - Notify user that they are listed in a DNSBL and which one
	 * SNOOP - Report the user to the logchannel or services channel
	 * KLINE - AKILL the user from the network (default AKILL is 24 hours)
	 */
	 
	dnsbl_action = kline;
};

/******************************************************************************
 * OPERATOR AND PRIVILEGES CONFIGURATION SECTION.                             *
 ******************************************************************************/

/* Operator configuration
 * See the PRIVILEGES document for more information.
 * NOTE: All changes apply immediately upon rehash. You may need
 * to send a signal (killall -HUP atheme-services) to regain control.
 */
/* (*) Operclasses specify groups of services operator privileges */
/* The "user" operclass specifies privileges all users get.
 * This may be empty (default) in which case users get no special privileges.
 * If you use the security/cmdperm module, you will need to grant command: privileges
 * to every command that you want users to be able to use.
 */
operclass "user" { };

/* The "ircop" operclass specifies privileges all IRCops get.
 * This may be empty in which case IRCops get no privs.
 * At least chan:cmodes, chan:joinstaffonly and general:auspex are suggested.
 */
operclass "ircop" {
	privs {
		special:ircop;
	};

	privs {
		user:auspex;
		user:admin;
		user:sendpass;
		user:vhost;
		user:mark;
	};

	privs {
		chan:auspex;
		chan:admin;
		chan:cmodes;
		chan:joinstaffonly;
	};

	privs {
		general:auspex;
		general:helper;
		general:viewprivs;
		general:flood;
	};

	privs {
		operserv:omode;
		operserv:akill;
		operserv:jupe;
		operserv:global;
	};

	privs {
		group:auspex;
		group:admin;
	};
};

operclass "sra" {
	/* You can inherit privileges from a lower operclass. */
	extends "ircop";

	privs {
		user:hold;
		user:regnolimit;
	};

	privs {
		general:metadata;
		general:admin;
	};

	privs {
		#operserv:massakill;
		#operserv:akill-anymask;
		operserv:noop;
		operserv:grant;
		#operserv:override;
	};

	/* needoper
	 * Only grant privileges to IRC users in this oper class if they
	 * are opered; other use of privilege (channel succession, XMLRPC,
	 * etc.) is unaffected by this.
	 *
	 * This flag is *not* inherited by operclasses that extend this one;
	 * you will have to set it explicitly for each operclass.
	 */
	needoper;
};


/* (*) Operator blocks specify accounts with certain privileges
 * Oper classes must be defined before they are used in operator blocks.
 */
operator "jilles" {
	/* operclass */
	operclass = "sra";
	/* password
	 * Normally, the user needs to identify/log in using the account's
	 * password, and may need to be an IRCop (see operclass::needoper
	 * above). If you consider this not secure enough, you can
	 * specify an additional password here, which the user must enter
	 * using the OperServ IDENTIFY command, before the privileges can
	 * be used.
	 * The password must be encrypted if a crypto module is in use.
	 */
	#password = "$1$3gJMO9by$0G60YE6GqmuHVH3AnFPor1";
};

/******************************************************************************
 * INCLUDE CONFIGURATION SECTION.                                             *
 ******************************************************************************/

/* You may also specify other files for inclusion.
 * For example:
 *
 * include "etc/sras.conf";
 */
